Menu functions
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission.
93/115
•
Auto-update of date & time
—
to synchronize the time. Your organisation
can define if the terminal synchronizes to Network time, GPS time, or both.
Select On to synchronize the clock automatically. Select Confirm first if you
want to confirm synchronization manually. If you don't want the clock to be
synchronized at all, select Off.
If the battery is removed from the radio for a long time or if the battery is
completely empty, you may need to set the time and date again.
Aliasing
You can inform the network that you are using a particular radio by selecting
Menu
→
Settings
→
Aliasing
→
Login or selecting
Go to
→
Aliasing login and entering your radio user number. If you do not enter your
radio user number, Incorrect radio user number is displayed. After you have
entered the radio user number, the radio asks for your radio user PIN code. If
a radio user PIN code is not needed, just press
OK
. If the login is successful,
Aliasing login accepted is displayed. If the login fails, Aliasing login failed. Re-
login again? is displayed. If you select
Yes
, the Aliasing starts again. To exit
the Aliasing, select
No
. Note that the network can also initiate aliasing login.
When aliasing login is about to end, Aliasing login is about to end. Re-login
again? is displayed. Select
Yes
or
No
. When the network cancels aliasing
login, Aliasing login ended. Re-login again? is displayed. Select
Yes
or
No
.
In a situation where the network changes the radio user number, either RUN
changed to: or RUN changed to unknown number is displayed. In both cases
you can either accept or reject the new number by pressing Accept or Reject.
You can log out from aliasing by selecting
Menu
→
Settings
→
Aliasing
→
Logout or selecting
Go to
→
Aliasing logout and entering your radio
user number. After you have entered the radio user number, the radio asks for
your radio user PIN code. If a radio user PIN code is not needed, just press
OK
. If the logout is successful, Logged out is displayed. If the logout fails,
Logout failed is displayed.
Polaris_en_print.book Page 93 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...