Group calls
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission.
39/115
When you change the folder, the new selected group will be the group that
has the same index number as the latest selected group in the previous
folder. If the new folder has less groups than the previous folder and the group
index does not exist, the last group in the new folder is selected. However, if
the home group had been set as the selected group with the back key or the
latest selected group was set by the network, the selected group does not
change when you change the folder.
Select a talk group
Turn the group selector until you reach the desired group. Wait until Group
selected is displayed and the radio plays a short tone.
When you turn the group selector, the group name appears on the display,
and if voice feedback is activated, the radio plays the index number of the
current group.
To select the home group, press and hold the back key.
Or, you can select a group by pressing in the idle mode and selecting the
desired group from the list of talk groups. Wait until Group selected is
displayed and the radio plays a short tone.
You may be able to select groups also via number key shortcuts. This is
useful for example when the radio is in the car kit holder and the group
selector cannot be used. For more information, contact your organisation.
Note that if you change your selected group, you cannot receive calls from the
group that used to be your selected group unless the group is included in
scanning.
Scanning settings
1. Select
Menu
→
Talk grou ps
→
Group settings
→
Scanning.
2. To switch scanning on, scroll to On, and press
OK
. To switch scanning off,
scroll to Off, and press
OK
.
You can also quickly activate and deactivate scanning in the fast menu. See
Fast menu on page 33. is displayed when scanning is on.
Polaris_en_print.book Page 39 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...