Group calls
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission.
43/115
Your organisation can define "receive only" groups to which you cannot make
group calls.
Call a scanned talk group
To make a call to a scanned group after the conversation has ended, press
and hold the PTT key while the group name and are still on the display.
If you have set the PTT key to always make a call to the selected group, you
cannot call a scanned group in this way; see PTT key settings on page 40. To
call the scanned group, first set it as the selected group; see Select a talk
group on page 39.
Call a dispatcher (network service)
1. To access the list of talk groups in the selected folder, press in the idle
mode.
2. Scroll to the desired group, and press .
If the group whose dispatcher you are calling is not your selected group or if
you are not scanning the group, you may have to wait a few seconds before
your call is connected. Note that all talk groups may not have dispatchers.
If the call is changed to a one-way call, Use PTT to speak is displayed, and
you must press and hold the PTT key when you speak.
When the key has been parameterised to function as the duty key, you
can also set the radio to start a phone call to the dispatcher of the selected
group when you press the duty key ; see Duty key setting on page 87. If
the call is changed into a one-way phone call, press and hold the PTT key
when you speak.
Q
Talk groups (Menu 5)
This menu contains the folders and talk groups that have been stored
in the memory of your radio. You can also view and change settings
related to groups, and view the group journal.
See also Home group on page 36, and Start group communication on
page 38.
Polaris_en_print.book Page 43 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...