Positioning
PS11366AENAA01 TH1n - User Guide
64/115
This document is the property of Cassidian and should not be copied or circulated without permission.
To be able to track a specific waypoint in idle mode (to see the current
coordinates, name of the target waypoint, distance to the waypoint, and an
arrow pointing in the direction of the waypoint), do one of the following:
1. Open Waypoints in the Positioning menu.
2. Scroll to the target waypoint in the list, and press
Options
.
3. Scroll to Go to idle mode mode, and press
Select
.
or
1. Open Waypoints in the Positioning menu.
2. Scroll to the target waypoint in the list, and press
Select
.
3. Press
Options
.
4. Select Go to idle mode mode, and press
Select
.
To remove waypoint information from the idle mode display, select Position
settings
→
Waypoint idle off.
To deactivate position information in idle mode, select Position
settings
→
Display position info in idle mode
→
Off.
Position settings
To change settings related to positioning, select
Menu
→
Positioning
→
Position settings. You need access rights to modify the position
settings. For more information, contact your organisation.
GPS receiver
Select GPS receiver
→
GPS automatic to activate the GPS receiver only when
you open Positioning from the menu, send information using NMEA interface,
or receive a position request that is answered. Select GPS always on to have
the GPS receiver active all the time. Using the GPS receiver may drain the
battery faster.
Polaris_en_print.book Page 64 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...