Group calls
PS11366AENAA01 TH1n - User Guide
38/115
This document is the property of Cassidian and should not be copied or circulated without permission.
Receive only groups
Your organisation can define "receive only" groups to which you cannot
initiate group calls.
Q
Start group communication
To start group communication, group calls must be on. Select a folder and a
talk group you primarily want to communicate with, activate scanning if you
want, and select the groups you want to scan. You may also define how you
want the PTT key to function.
Switch group calls on and off
1. Select
Menu
→
Talk grou ps
→
Group settings
→
Group calls.
2. To switch group calls on, scroll to On, and press
OK
. To switch group calls
off, scroll to Off, and press
OK
.
You can call or receive calls from a talk group if it is a selected or a scanned
group and if it is available. These groups have their own indicators in the
group list; see Edit group folders on page 44.
If you do not want to receive calls from talk groups, switch group calls off. If
you do not want to listen to group calls, deactivate the loudspeaker and
earpiece by pressing and holding .
Select a folder
To select a folder whose talk groups you want to be available, press in the
idle mode to access the list of folders. Enter the first characters of the folder
name or scroll to the desired folder, and press
Select
.
To view the list of talk groups that are included in the selected folder, press
in the idle mode.
Polaris_en_print.book Page 38 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...