Group calls
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission.
45/115
View background folder
You can receive calls from background groups even when scanning or group
calls are switched off. These calls may also interrupt group calls in progress.
You may be able to respond to calls from background groups, but you cannot
start them.
To view the list of background groups, select
Menu
→
Talk grou ps
→
View
background folder. To view information about the group, scroll to the name,
and press
View
. If there is a backslash ( \ ) across the indicator in front of the
group name, the group is unavailable.
Restore group settings
In this submenu, you can restore talk groups to their original settings.
Select
Menu
→
Talk grou ps
→
Restore group settings and from the following:
•
Restore folder
—
to set the scanning priorities and scanning states of the
talk groups in the desired folder to the original values. If the folder is a
user’s own folder in My folders, the groups copied by the user are deleted
from the folder.
•
Dynamic groups
—
to set the scanning priorities and scanning states of
predefined dynamic groups to the original values, and to delete dynamic
groups that have been added over-the-air.
•
My folders
—
to set the scanning priorities and scanning states of
predefined talk groups in the user’s My folders to the original values, and to
delete the groups copied by the user.
•
Restore all
—
to set the scanning priorities and scanning states of all talk
groups (except the dynamic groups added over-the-air) to the original
values. Groups copied by the user to the user’s My folders are deleted.
The original home group is set as the selected group, and the folder of the
home group is set as the selected folder. If a group has been
parameterised as a selected group (TPT), it is first set as a selected group,
instead of the default home group, when restoring.
Polaris_en_print.book Page 45 Tuesday, October 23, 2012 12:30 PM