Menu functions
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission.
91/115
•
Duplex call settings (monophone only)
—
Select Monophone to route
the audio only to the monophone. To route the audio back to the radio,
select Phone.
Modem settings
You can connect your radio with a data cable to a compatible PC, and use it
as a modem to enable connectivity from your PC to a data network (network
service). To establish a connection to the data network, you must activate the
access point you want to use for the connection. For details on the access
point, contact your network operator or service provider.
1. Select
Menu
→
Settings
→
Modem settings.
2. To activate an access point, select Active access point. Scroll to the
desired access point, and press
Activate
.
To change the access point settings, select Edit active access point. To
change the alias you are using for the access point, select Alias for access
point. To change the Access Point Name (APN), select Access point.
Contact your network operator or service provider for the APN.
Security settings
Select
Menu
→
Settings
→
Security settings, and select one of the following:
•
Phone code request
—
to set the radio to ask for your phone code every
time the radio is switched on.
Your organisation can define if the phone code request is enabled or not.
If you enter an incorrect phone code five times in succession, the code is
blocked, and you must enter the security code to unblock the phone code.
•
Configure access levels
—
to change what kind of access rights are
required for certain functions. You must enter the configuration code for
this function.
•
Access level
—
to change your access level (Extended or Normal), which
determines what kind of access rights you have. You must enter the
access level code for this function. If the Access level is set to Extended,
switching the radio off returns the level to Normal.
Polaris_en_print.book Page 91 Tuesday, October 23, 2012 12:30 PM