Menu functions
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission.
75/115
The text of the unit alert message is predefined by your organisation. When
you receive a unit alert message, the message is displayed, the radio plays
an alarm tone, the lights flash, and the General profile is activated. To stop the
alarm, press
Stop
.
A unit alert message is sent like a status message.
Send status messages
Tip:
To send a status message in the idle mode, enter the status
number, and select
Options
→
Send as a status
→
Status or Situation.
Tip:
When the key has been parameterised to function as the duty
key, you can set the radio to send status messages when you press
. To send a callback request to the address of the selected group,
press and hold the duty key in the idle mode. To send a situation
indicator, enter the situation number in the idle mode, and press and
hold the duty key. See Duty key setting on page 87.
Send status messages or callback requests
1. Select
Menu
→
Status messages
→
Send status.
2. To send a status message, select Status. Scroll to the desired status
message, and press
OK
. You can also search for a message by entering
its first letters.
To send a callback request, select Callback.
3. Select the recipient of the status message or callback request in one of the
following ways:
•
If a default recipient number is displayed, press
OK
to send the
message to the default recipient. See Status settings on page 79.
•
Search for an individual recipient from Contacts. Select
Search
→
Contacts, and select the desired name and number. To send
the message, press
OK
when the number is displayed.
•
Search for a talk group in the selected folder. Select
Search
→
Tal k
groups, and select the desired group to send the message.
Polaris_en_print.book Page 75 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...