Cassidian TH1n - Searching and Sending Contacts

Contacts
PS11366AENAA01 TH1n - User Guide
70/115 This document is the property of Cassidian and should not be copied or circulated without permission.
3. Enter the area code and the phone number, and press OK .
4. Select one of the following number types:
• Private ( ) for a TETRA number other than an abbreviated TETRA
number
• Abbr. number ( ) for an abbreviated TETRA number
• Phone ( ) for a public telephone network number
• Office ext. no. ( ) for an office extension number
5. When the name and number are saved, press
Done .
Tip: To save a phone number in the idle mode, enter the phone
number, and press
Save .
Q Search for names
1. Press Names , and enter the first characters of the name you are searching
for. Or, select
Menu → Contacts → Search. Enter the first characters of the
name you are searching for, and press
Search .
2. Scroll to the name you want.
3. When the desired name is highlighted, you can call the default number. To
make a phone call, press . To make an express call, press and hold
the PTT key. Note that express calls can be made to TETRA network and
public telephone network numbers.
If multiple numbers have been saved for the name and you want to call one
of the other numbers, first press
Details , and scroll to the number you want
to call.
Tip: To search for a name during a duplex and PSTN call, select
Options → Contacts → Search. During a call made with the PTT key,
the right selection key
Names is used.
Q Send and receive contacts
Send contacts
You can send a contact entry to an individual recipient or to a group.
Polaris_en_print.book Page 70 Tuesday, October 23, 2012 12:30 PM