Write text
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission.
67/115
9. Write text
You can enter text, for example, when writing messages, in two different
ways. You can use traditional text input or predictive text input. Note that your
radio may not support predictive input. For more information, contact your
organisation.
When you are writing text, on the top left of the display indicates
predictive text input, and indicates traditional text input. The character
case is indicated by , , or next to the text input indicator, and you
can change the character case by pressing . The number mode is
indicated by . To change to the number mode, press and hold and
select Number mode. To change back to the letter mode, press and hold
.
When writing text, select
Options
→
Dictionary on to set predictive text input
on if it is available for the language. To change back to traditional text input,
select Dictionary off To temporarily change the writing language, select
Writing language.
Tip:
To quickly set predictive text input on or off when writing text,
press twice, or press and hold
Options
.
To set a different language for writing text and for display texts, see Language
settings on page 88.
Q
Predictive text input
You can enter any letter with a single key press. Predictive text input is based
on a built-in dictionary to which you can also add new words.
1. Start writing a word by using the keys - . Press each key only
once for one letter. The word changes after each key press.
To insert a number while in the letter mode, press and hold the desired
number key. For more instructions, see Tips on page 68.
2. When you have finished writing the word and it is correct, confirm it by
pressing or adding a space with .
Polaris_en_print.book Page 67 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...