Direct mode
PS11366AENAA01 TH1n - User Guide
56/115
This document is the property of Cassidian and should not be copied or circulated without permission.
To queue for your turn to talk during a call, press and hold the PTT key. A
queuing tone is played while you are in the queue. You can start speaking
after a short tone is played and appears on the display. To stop queuing,
release the PTT key.
Voice override
With voice override (network service), you can override the communication in
the group and avoid the need to queue for your turn to speak. If you have a
right to use voice override, the selection key
Overrid.
is available when the
radio receives a direct mode call.
Note:
The sender can be configured so that although you have a right
to use voice override, the sender does not admit it, and you need to
queue for your turn to speak.
To request for voice override, press
Overrid.
, and press and hold the PTT
key. You can start speaking after a short tone is played and appears on the
display.
Mute the call temporarily
When the radio is receiving a direct mode call, you can mute the call for a
predefined time (0-60 seconds) by pressing for at least 1 second.
Q
Make a direct mode call
Note that in direct mode you cannot make a call by pressing .
Make a direct mode group call
1. Make sure that the names of the desired channel and group are displayed.
2. Press and hold the PTT key, and start speaking after a short tone is played
and appears on the display.
When the key has been parameterised to function as the duty key,
pressing and holding in the idle mode makes a call to the first group on
the selected channel.
Make a direct mode individual call
1. Enter the individual number of the recipient.
Polaris_en_print.book Page 56 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...