Menu functions
PS11366AENAA01 TH1n - User Guide
86/115
This document is the property of Cassidian and should not be copied or circulated without permission.
Q
Talk groups (Menu 5)
See Talk groups (Menu 5) on page 43.
Q
Settings (Menu 6)
Profiles
Your radio has various profiles for different events and environments, and you
can customise the settings related to the profiles. The available profiles are
General, Silent, Meeting, Outdoor, Pager, Carrying, Headset, and
Monophone.
To activate a profile, press quickly in the idle mode, and select the desired
profile.
Customise profiles
1. Select
Menu
→
Settings
→
Profiles.
2. Scroll to the desired profile, and select
Options
→
Personalise.
3. Select from the following settings: Incoming call alert, Ringing tone for two-
way phone calls, Push-to-talk ringing tone for one-way phone calls,
Ringing volume, Vibra option, Message alert tone, Status message alert
tone, Flash message alert tone, Keypad tones, Warning tones, Audio
setting for setting the active speaker and microphone, Alert for for setting
the radio to ring only for calls from a selected caller group (see Caller
groups on page 73), Voice feedback, Lights, and Light indicator.
Note that even if Top microphone or External speaker is selected in Audio
setting, to improve the voice quality, the bottom microphone is used in two-
way calls when the loudspeaker or external speaker is active.
Call settings
Anykey answer
When this function is activated, you can answer a phone call by briefly
pressing any keypad key, except for , , and . Select
Menu
→
Settings
→
Call settings
→
Anykey answer
→
On or Off.
Polaris_en_print.book Page 86 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...