Cassidian TH1n - Call Transfer and In-call Options

Phone calls
PS11366AENAA01 TH1n - User Guide
52/115 This document is the property of Cassidian and should not be copied or circulated without permission.
Call transfer
When you make a phone call that needs to go via the dispatcher (for example
when the call must first be authorized by the dispatcher), Transferring call is
displayed after you enter the phone number and press before the
dispatcher transfers the call to the desired number.
In-call options
To access the menu during a two-way call, press Menu .
When you press
Options during a two-way call, the following options are
available:
• Mute or Unmute — Mutes or unmutes the microphone.
• Send DTMF — Allows you to enter and send DTMF tones, such as
passwords or bank account numbers.
• Contacts — Allows you to access the contacts directory.
• End call — Ends the call.
Q Answer a phone call
When a ringing tone is played, press .
If is displayed, the loudspeaker is in use. To deactivate or activate the
loudspeaker, press .
If the call is a one-way call, you can also answer it by pressing and holding the
PTT key. is displayed during a one-way call.
To end the call, press or the fast menu key .
Mute the ringing tone
To mute the ringing tone, press Silence .
Reject a phone call
To reject an incoming call and to send the caller the line busy tone, press
or
Reject .
Polaris_en_print.book Page 52 Tuesday, October 23, 2012 12:30 PM