Menu functions
PS11366AENAA01 TH1n - User Guide
92/115
This document is the property of Cassidian and should not be copied or circulated without permission.
•
Change of access codes
—
to change the phone code or the security code.
See Access codes on page 11.
You should avoid using access codes similar to the emergency numbers,
such as 112, to prevent accidental dialling of the emergency number.
Display settings
Select
Menu
→
Settings
→
Display settings, and select one of the following:
•
Wallpaper
—
to set your radio to display a background image, known as a
wallpaper, when the radio is in the idle mode. Your radio supports JPEG,
GIF, WBMP, BMP, OTA-BMP, and PNG formats, but not necessarily all
variations of these file formats.
To select a wallpaper from Gallery, select Select wallpaper. To activate or
deactivate the wallpaper, select On or Off, respectively. The wallpaper is
not displayed when the radio activates the screen saver.
•
Screen saver
—
to activate or deactivate the screen saver, select On or Off,
respectively. To set the time after which the screen saver on the display is
activated, select Time-out.
•
Menu view
—
t o set the way the radio displays the main menu. Select List
for the menu list view, and Grid for the menu grid view.
•
Brightness
—
to make the display brighter or darker.
Time and date settings
Select
Menu
→
Settings
→
Time and date settings, and select one of the
following:
•
Clock
—
to change time settings. Select Show clock to display the time in
the idle mode, or Hide clock to hide it. Select Set the time to adjust the
clock to the correct time, Time zone to select the time zone, and Time
format to select the 12-hour or 24-hour time format.
•
Date
—
to change date settings. Select Show date to show the date in the
idle mode, or Hide date to hide it. Select Set the date to change the date.
You can also select the date format and date separator.
Polaris_en_print.book Page 92 Tuesday, October 23, 2012 12:30 PM
To Next Page
Loading...