Cassidian TH1n - Write Text Messages

Menu functions
PS11366AENAA01 TH1n - User Guide
80/115 This document is the property of Cassidian and should not be copied or circulated without permission.
Write text messages
1. Select Menu → Messaging → Create message.
2. Write the message. For details, see Write text on page 67. You can also
insert a template into the message; select
Options →
Use template, and select the desired template.
The number of characters left for the message and the number of
characters in the current message are shown at the top right corner of the
display.
3. When you finish writing the message, press
Send .
Note that if the receiving radio does not support text message
concatenation, the maximum length of the text message is 140 characters
to private numbers and 160 characters to phone and office extension
numbers.
To send the message as a flash message (network service), select
Options → Sending options → Send as flash. The receiving terminal must
support the reception of flash messages. When you receive a flash
message, the beginning of the message appears on the display.
Your organisation can define if the flash messages are deleted after you
have read or saved them in the
Inbox folder.
Messages are saved in the Inbox folder. It is possible to configure the radio
so that when the Inbox folder is full, the oldest read message is
automatically deleted when a new message is received.
4. Select the recipient of the message in one of the following ways:
• If a default recipient number is displayed, press OK to send the
message to the default recipient. See Message settings on page 83.
• Search for an individual recipient from Contacts. Select
Search → Contacts, and select the desired name and number. To send
the message, press
OK when the number is displayed.
• Search for a talk group in the selected folder. Select Search → Tal k
groups, and select the desired group to send the message.
Polaris_en_print.book Page 80 Tuesday, October 23, 2012 12:30 PM