Cassidian TH1n - Speed Dials and Caller Groups

Contacts
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission. 73/115
• Contacts view — You can select how your radio shows the stored names
and numbers: Normal name list shows five names at a time, and Name
and number shows one name and phone number at a time.
• Memory status — You can check what percentage of the internal memory
of the radio is in use, and how much memory is still free.
Q Speed dials
You can set any of the number keys - to work as a speed dialling
key.
1. Select
Menu → Contacts → Speed dials. Scroll to the desired speed dialling
key (2 to 9), and press
Assign .
2. Press
Search , and select the desired name and number.
After a number has been assigned for a speed dialling key, press
Options ,
and you can view, change, or delete the assigned phone number.
To make call with speed dialling, see Speed dialling on pages 48 and 51.
Q Caller groups
You can set the radio to play a specific ringing tone and show a graphic on the
display when you receive a phone call from a particular name and phone
number. Select
Menu → Contacts →
Caller groups, and select the caller group you want. You can change options
for Group name, Group ringing tone, and Group logo, and edit the member list
of the caller group in Group members.
You can use the Alert for setting in profiles to set the radio to ring only when
receiving phone calls from names and numbers that belong to a specific caller
group. See Profiles on page 86.
Q Terminal info
You may see details about your subscriber identity and a short text written by
your organisation, if so defined, by selecting
Menu →
Contacts → Terminal info. You can also see the terminal software version
information.
Polaris_en_print.book Page 73 Tuesday, October 23, 2012 12:30 PM