Cassidian TH1n - Page 87

Menu functions
TH1n - User Guide PS11366AENAA01
This document is the property of Cassidian and should not be copied or circulated without permission. 87/115
Summary after call
When this function is activated, the radio briefly displays the approximate
duration of the last two-way phone call. Select
Menu → Settings → Call
settings
→ Summary after call → On or Off.
Note: The actual invoice for calls and services from your service provider may
vary, depending upon network features, rounding-off for billing, taxes and so
forth.
Push-to-talk setting
You can set how you want the PTT key to function when making group calls in
the network mode. Select
Menu → Settings → Call settings → Push-to-talk
setting, and select one of the following:
• Default — to set the radio to make a call to the talk group whose name is on
the display (either the selected group or the currently active scanned
group) when you press and hold the PTT key.
• Selected group — to set the radio to always make a call to the selected talk
group when you press and hold the PTT key.
For details, see PTT key settings on page 40.
Duty key setting
The key above the PTT key can be parameterised to function as the duty
key.
You can set how you want the duty key to function in the network mode.
Select
Menu → Settings → Call settings → Duty key setting, and select one of
the following:
• Dispatcher call — Pressing starts to make a phone call to the
dispatcher of the selected group. If the call is changed into a one-way
phone call, press and hold the PTT key when you speak.
• Dispatcher callb. req. — Pressing sends status messages. To send a
callback request to the address of the selected group, press and hold
in the idle mode. To send a situation indicator, enter the situation number,
and press and hold .
• Home group call — Pressing and holding makes a call to the home
group. Press and hold the duty key when you speak.
Polaris_en_print.book Page 87 Tuesday, October 23, 2012 12:30 PM