CenterVue drs plus - Device Setup and Initial Configuration; Initial Device Setup

DRSplus – Operating Manual
15/58
7. Preparation of device
This section explains how to set up the drsplus for use.
7.1 First usage
Read carefully the chapter 5 before proceeding to the device operation.
To prepare drsplus for the first usage:
❖ Take the device out of its shipping box and place it onto a suitable table;
❖ Install the headrest (included in the package) on the device (Fig. 11);
❖ Connect the power supply to the back panel, and to the wall socket;
❖ (Optional) Connect a printer to one of the USB ports located in the back panel of the device;
❖ Install the cables protection shell.
drsplus needs to be operated in a semi dark environment, to ease the natural dilation
of the pupil.
Fig. 11 – Headrest