DRSplus – Operating Manual
14.2 Backup
This panel (Fig. 48) provides the utility to perform the backup of the patient data stored in the on-
board disk.
Fig. 48 – “Backup” panel
Data can be backed up on an external, USB-connected memory device (flash memory or disk) or a
remote network destination.
Backup jobs can be run manually or scheduled to run automatically either once a day or once a week.
Only the Administrator user can create a backup configuration. The Operator user can only execute
an already-configured backup job.
The panel displays the date and time of the last successful backup.
❖ HARD DISK FAILURES ARE UNPREDICTABLE AND MAY CAUSE IRREVERSIBLE LOSS
OF DATA
❖ IN THE EVENT OF LOSS OF DATA, IT CAN BE EASILY RECOVERED FROM THE LAST
BACKUP PERFORMED
❖ IT IS THE OPERATOR’S RESPONSIBILITY TO KEEP AN UPDATED BACKUP OF THE
DATA GENERATED BY THE drsplus THROUGH REGULAR USE OF THE BACKUP
UTILITY
❖ THE MANUFACTURER DECLINES ALL LIABILITY FOR LOSS OF DATA DUE TO HARD
DISK FAILURES
❖ MANUAL ALTERATIONS OF THE FILES GENERATED BY THE BACKUP UTILITY MAY
AFFECT THE RECOVERY OF DATA
To Next Page
