Chloride SYNTHESIS - Connecting the Ac Input Supply (4-12 Kva); Figure D: Ups Connections

1.6.1 CONNECTING THE AC INPUT SUPPLY (4-12KVA)
In order to gain access to the external electrical connections it is necessary to remove the
protection panel situated on the rear of the UPS. (Ensure that the UPS is electrically
isolated before removing this panel.) NOTE: Once installation has been completed, the
leveling feet on the UPS should be lowered so that the casters are off the floor.
Input and
Battery
Connections
Conduit
Entr
y
Points
Figure D: UPS connections – back of UPS (4-12kVA)
14