Section 3: Operation
Christie ACT User Manual 3-9
020-100129-05 Rev. 1 (02-2010)
Actions
An action is a command that is executed by Christie ACT. For example, turning LED 1 ON. Actions are output
events that Christie ACT sends to external devices.
The serial ports addressed in the scripts are as follows:
Cues
Actions sent from external devices to the Christie ACT which Christie ACT will then activate an action on.
Actions Action Options
LED On/Off/Pulse/Flash
Relay Open/Close/Pulse Open/Pulse Close
GPO Low/High/Pulse Low
Serial Port/Signal/Termination Character
Ethernet IP/Port/Signal/Termination Character
Buzzer Time in msec.
Wait Time in msec.
SET Name/Value
IF Condition/True Actions/False Actions
WHILE Condition/Loop Actions
CALL Subroutine
Serial Ports
1 RS232 IN
2 RS232 OUT
3 RS422
4 RS232 Audio
Cue
Cue Options
Button Click/Hold
Input OFFtoON/ONtoOFF/PulseON/PulseOFF
GPI LowToHigh/HighToLow/PulseHigh/PulseLow
Time Time of day with Start Date/End Date/Days of Week Selection
Ethernet Signal to match
Serial Port/Signal to match
To Next Page
Loading...