Cimbali M26 - Page 60

11
20
310
A
ON
3
10
B
English
14 EN
The water in the boiler must be changed at least
once a day.
NOTE: the "WATER CHANGE" function can be
programmed by the technical personnel: in this case, the
request message appears at the time set and the water
change cycle cannot be interrupted.
Ensure that the indication on the display (where present)
corresponds to the working pressure value.
Keep the hot water distributor key (11) pressed down for
approximately 5 seconds.
The following message will be displayed: “WATER
CHANGE...%”. The water from the boiler will drain from the
hot water nozzle (20) (60 - 70% ca. of the total capacity).
The boiler resistance and all dispensing keys will be disabled.
CAUTION: do not cover the cup warmer tray
with any type of cloth.
The machines have a cup tray (3) for stocking the cups.
2QO\SODFHFXSVDQGJODVVHVXVHGZLWKWKHFRႇHHPDFKLQH
on the cup tray. No other objects must be placed on
the tray.
Thoroughly drain the cups before placing them on the tray.
A
version. Note. The heating of the cup-warmer tray
(3LVGHDFWLYDWHGGXULQJWKHDXWRPDWLFVZLWFKRႇSKDVH
7KHFRQGLWLRQLQHႇHFWDWWKHWLPHZKHQWKHPDFKLQHZDV
VZLWFKHGRႇZLOO EHUHVWRUHG WKHQH[W WLPHWKHPDFKLQH
automatically switches on.
By activating the ENERGY SAVING, mode the cup-warmer
is automatically set to Level 1.
To activate the resistance of the cup warmer tray (23) press
button (22WRFKDQJHWKHFXSZDUPHUSRZHUSUHVVWKH
12. Changing the water in the boiler (only DT version with display)
13. Cup Warmer (where applicable)
(22) key a number of times.
- = maximum power symbol
- = medium power symbol
- = minimum power symbol
- no symbol = OFF
Therefore, to disable tray heating (23), press the key (22)
several times until no symbol is visible on the display.
Dispensing will stop automatically (Note. The delivery can
be interrupted in whichever moment by means of the push
button 11).
After the procedure, the machine will return to its normal
IXQFWLRQVDQGWKHERLOHUZLOOEHUH¿OOHGZLWKIUHVFKZDWHU
B
version. Press the button (10) and check to see that
the light turns on.
02_M26_UNICO_EU_2314.indd 14
02_M26_UNICO_EU_2314.indd 14
07/04/2023 12:05:03
07/04/2023 12:05:03