To Next Page

To Previous Page

Enter Setup

1560 Series Barcode Scanner User Guide

3.2.2 CONFIGURE RELATED SETTINGS

Sniff Mode (Power-saving)

By default, this feature is enabled, meaning the scanner will listen to the wireless network at a

reduced rate.

Note: When connecting more than two scanners to a notebook computer or PDA with

Bluetooth

wireless technology, we suggest that you disable the power-saving

setting for a more reliable connection.

Device Name Broadcasting

The scanner can be configured to hide itself from other devices equipped with Bluetooth

wireless

technology. Simply disable the device name broadcasting setting so that it won’t be discovered by

any other computer or PDA. However, broadcasting must be enabled for establishing an initial

connection with the scanner. For example, you can disable device name broadcasting after

successfully connecting the scanner to WorkStation1. Such connection will be maintained

automatically unless the scanner is removed from the paired device list (called unpairing) by

WorkStation1 or any changes made to authentication and the PIN code. If you want WorkStation2

to connect to the scanner, you will have to enable device name broadcasting first.

Note: By default, device name broadcasting is enabled (which is required for initial

connection).

*Enable

Disable

*Enable

Disable

CipherLab 1560 User Manual

Questions and Answers: