123
Update
Chapter 4
Changing Symbology Settings
4.10 GS1-128 (EAN-128)
4.10.1 CODE ID TRANSMISSION
Decide whether to include the Code ID ("]C1") in the data being transmitted.
4.10.2 FIELD SEPARATOR (GS CHARACTER)
Decide whether to apply a field separator (to convert the FNC1 control character to human
readable character).
1) Read the label above to enable field separator.
2) Read the “
Hexadecimal Value” label on page 206 for the desired character string.
3) Read the “Validate” label to complete this setting.
Enable GS1-128
Disable GS1-128
Transmit GS1-128
Code ID
Do Not Transmit
Enable Field Separator …
To Next Page
Loading...
Need help?
General
