49
Update
Chapter 2
Selecting Output Interface
BT HID
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported —
No. Keyboard Type No. Keyboard Type
64 PCAT (US) 71 PCAT (Belgium)
65 PCAT (French) 72 PCAT (Spanish)
66 PCAT (German) 73 PCAT (Portuguese)
67 PCAT (Italy) 74 PS55 A01-2 (Japanese)
68 PCAT (Swedish) 75 User-defined table
69 PCAT (Norwegian) 76 PCAT (Turkish)
70 PCAT (UK)
2.1.2 RESET CONNECTION
For BT HID, you can only have the scanner connected to one computer at a time. If you
want to connect the scanner to another host, you must have it read the “Reset
Connection” label so that the current connection record will be cleared. Then, the scanner
will restart itself automatically. Go through the whole process in
3.2.3 Connect to Dongle
to establish a new connection.
Note: The “Restore System Defaults” label will have the current connection record
cleared as well.
Reset Connection
To Next Page
Loading...
Need help?
General
