CipherLab 1560 User Manual

61
Update
Chapter 2
Selecting Output Interface
2.3.2 INTER-FUNCTION DELAY
By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254,
to match the computer response time of the keyboard interface. Such delay time is
inserted between every function code (0x01 ~ 0x1F) being transmitted. The longer the
delay time is, the slower the transmission speed will be.
Value
Delay Time Value Delay Time
0 Disable 195 ~ 204 200 millisecond
1 ~ 14 10 millisecond 205 ~ 214 210 millisecond
15 ~ 24 20 millisecond 215 ~ 224 220 millisecond
25 ~ 34 30 millisecond 225 ~ 234 230 millisecond
35 ~ 44 40 millisecond 235 ~ 244 240 millisecond
45 ~ 54 50 millisecond 245 ~ 254 250 millisecond
… …
1) Read the label above to specify the inter-function delay.
2) Read the “
Decimal Value” label on page 205 for the desired inter-function delay
(millisecond).
3) Read the “Validate” label on the same page to complete this setting.
Inter-Function Delay … (*0 ~ 25
4
)

CipherLab 1560 Specifications

General

Brand	CipherLab
Model	1560
Category	Barcode Reader
Language	English