186
Enter Setup
1560 Series Barcode Scanner User Guide
Electrical Characteristics
Battery Rechargeable Li-ion battery – 3.7 V, 800 mAh
DC 5V ± 5% (with adaptor)
Power Adapter
Input AC 100~240 V, 50/60 Hz
Output DC 5V ± 5% (with adaptor via 3656)
Environmental Characteristics
Temperature Operating
Storage
0 °C to 50 °C
-20 °C to 60 °C
Humidity
(Non-condensing)
Operating
Storage
10% to 90%
5% to 95%
Resistance
Impact Resistance 1.5 m, 5 drops per 6 sides
Electrostatic Discharge ± 15 kV air discharge, ± 8 kV contact discharge
Programming Support
Configuration via Setup Labels Use setup labels or host serial commands.
Software Windows
®
-based ScanMaster
Firmware upgradeable Download firmware updates via the download utility.
Accessories (√ means “supported”)
Rechargeable Li-ion Battery
√ √
3656 Stand
√ √
Note: The 3656 stand is not only an Auto-Sense stand (for 1560 only) and capable of
charging the 1560/1562 scanner, but specifically designed for the scanner to
communicate with a host computer wirelessly.
To Next Page
Loading...
Need help?
General
