24
8700 Series Mobile Computer Reference Manual
1.5 NOTIFICATIONS
1.5.1 STATUS LED
A LED indicator is recessed above the [SCAN] button. It presents dual modes and each
mode presents dual colors. This LED indicator can be programmed to provide information
that helps diagnosing the status of the mobile computer. For example, if you are using
AG Runtime, you will be informed of the scanning result immediately. LED1 is used for
"Good Read" and will become solid green upon reading a barcode successfully.
LED1 provides the information on the charging status and barcode reading.
LED2 provides the information on wireless communications.
LED1: Red/Green
Red Green
User Power ON User definable User definable
Solid green for Good Read by
default
Power Off, Battery
Charging
System default
Flashing red: Charging
System default
Flashing green: Charging done
Charging Error System default
Flashing red and green: Charging error occurs
LED2: Blue/Green Blue Green
Bluetooth System default
Flashing blue, quickly: Waiting for
connection or connecting
Flashing blue, slowly: Connected
---
Wi-Fi --- System default
Flashing green, quickly: Waiting
for connection or connecting
Flashing green, slowly:
Connected
1.5.2 AUDIO
The mobile computer has a low power transducer type buzzer that is programmable for
status feedback. In particular, its frequency and duration can be programmed for the
alert of Good Read in the provided terminal emulation programs.
1.5.3 VIBRATOR
The mobile computer is integrated with a vibrator that is programmable for status
feedback. It makes the mobile computer applicable to work in noisy environments. In
particular, the vibrator can be programmed for the alert of Good Read in the provided
terminal emulation programs.
To Next Page
Loading...
Need help?
General
