57
Chapter 3 System Menu
3.6 LOAD PROGRAM
Launches the mobile computer’s Load Program service provided by the kernel. After a
program is downloaded to the mobile computer, you won’t be able to return to System
Menu by pressing [ESC] as the kernel will take over the job. In this case, restart the
mobile computer to activate the new program. Refer to Appendix I
Download Utility.
Note: When RS-232 is selected for the transmission interface, the mobile computer stays
in download mode for about 30 seconds only. The preparation (such as connecting
the RS-232 cable) and the kernel update should be done before the download
mode expires.
The following files are downloadable by Load Program command:
.SHX Program
Downloadable C program files and/or font file:
AG Runtime:
U8700.shx (Batch AG)
WU8700.shx (WLAN AG)
CipherNet Runtime:
87xx-5250.shx (CipherNet-5250)
87xx-VT.shx (CipherNet-VT)
BASIC Runtime
Note
:
B8700.shx
Program File
User program
Font File Refer to the Font Files folder on CD-ROM.
If you have downloaded a BASIC Runtime program, you will be able to select whether to
download a C program (.SHX) or BASIC program (.SYN) the next time you access the
Load Program command.
Note: (1) “Load Basic” menu is only available after you have downloaded a BASIC
Runtime program.
(2) In addition to the system font, there can be only one more font file
downloaded to the mobile computer.
To Next Page
Loading...
Need help?
General
