Cirrus DESIGN SR20 - Pitot Heat Required Annunciation

Cirrus Design Section 3A
SR20 Abnormal Procedures
P/N 11934-004 3A-11
Pitot Heat Required Annunciation
PITOT HEAT REQUIRED Caution
Displayed 20 seconds after system detects OAT is less than 41°F
(5°C) and Pitot Heat Switch is OFF.
1. Pitot Heat ...................................................................................ON
Pitot Heat Required Annunciation
PITOT HEAT OFF Caution
Displayed when system detects OAT is above 41°F (5°C) and Pitot
Heat Switch is OFF.
1. Pitot Heat ...................................................................................ON
PITOT HT RQD
PITOT HT OFF
Original Issue