Cirrus DESIGN SR20 - Oil Temperature High; Engine Speed High; Original Issue

3-18 P/N 11934-004
Section 3 Cirrus Design
Emergency Procedures SR20
Oil Temperature High
OIL TEMP Warning
Oil temperature is greater than 240°F.
1. Oil Temperature Gage........................................................ CHECK
If temperature normal:
a. If On-Ground........................... CORRECT PRIOR TO FLIGHT
b. If In-Flight............................................ CONTINUE, MONITOR
If temperature high:
a. Oil Pressure Gage....................................................... CHECK
If pressure normal:
(1) Power ..................................................................REDUCE
(2) Airspeed.......................................................... INCREASE
(3) Oil Temperature Gage.......................................MONITOR
If low, See Oil Pressure Out of Range - OIL PRESS
Warning checklist.
Engine Speed High
RPM Warning: Engine Speed High
Engine speed is between 2710 RPM and 2730 RPM for 10 seconds or
more, OR engine speed is above 2730 RPM for 5 seconds or more.
1. Tachometer ........................................................................ CHECK
If engine speed normal:
a. If On-Ground........................... CORRECT PRIOR TO FLIGHT
b. If In-Flight............................................ CONTINUE, MONITOR
If engine speed high:
a. Power.........................................................................REDUCE
b. Airspeed ........................ REDUCE UNTIL RPM BELOW 2700
2. Oil Pressure Gage ............................................................. CHECK
OIL TEMP
RPM
Original Issue