Cirrus DESIGN SR20 - Before Starting Engine

Cirrus Design Section 4
SR20 Normal Procedures
P/N 11934-004 4-9
Before Starting Engine
1. Preflight Inspection ...................................................COMPLETED
• WARNING •
Ensure that the airplane is properly loaded and within the
AFM’s weight and balance limitations prior to takeoff.
2. Weight and Balance............................................Verify within limits
3. Emergency Equipment ................................................ON BOARD
4. Passengers..................................................................... BRIEFED
• Note •
Ensure all the passengers have been fully briefed on smoking,
the use of the seat belts, doors, emergency exits, egress
hammer, and CAPS.
Verify CAPS handle safety pin is removed.
5. Seats, Seat Belts, and Harnesses ................ADJUST & SECURE
• Caution •
Crew seats must be locked in position and control handles
fully down before flight. Ensure seat belt harnesses are not
twisted.
Original Issue