Cisco 11503 - CSS Content Services Switch User Manual

Chapter 4 Using the CSS Logging Features
Frequently Queried Log Messages
4-54
Cisco Content Services Switch Administration Guide
OL-5647-02
NETMAN-5: Enterprise: Login
Failure:vty2 10.6.3.171 Mandy
SNMP Enterprise login failure traps
are enabled and an invalid username
and password have been entered. Refer
to Chapter 5, Configuring Simple
Network Management Protocol
(SNMP), for details on SNMP and the
CSS.
NETMAN-5: Generic:SNMP
Authentication > Failure from
x.x.x.x
A user is trying to use SNMP to poll
the CSS, but has entered the wrong
community string. Refer to Chapter 5,
Configuring Simple Network
Management Protocol (SNMP), for
details on specifying a community
string.
NETMAN-5: Enterprise:Service >
Transition:nexthop00001 -> down
The next hop IP address can not be
reached by the CSS. When you
configure a static route, an internal
service is automatically created by the
CSS. When the service is up, the static
route is included in the routing table. If
the service is unavailable, the service is
removed from the routing table.
Make sure that all of the routes
included in the CSS routing table are
available. Some routes may have
transitioned between states.
Table 4-8 Cisco 11500 Series CSS Log Messages (continued)
Log Message (sys.log: Subsystem
Name, Level, and Message) Cause and Resolution

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English