Cisco 11503 - CSS Content Services Switch User Manual

Chapter 4 Using the CSS Logging Features
Frequently Queried Log Messages
4-58
Cisco Content Services Switch Administration Guide
OL-5647-02
sntp Subsystem
SNTP-6: Sntp Server has
incorrect mode 29
This message indicates potential issues
with the SNTP server. Ensure that the
SNTP server is transmitting time
updates as “server” to the CSS. SNTP
server updates are the only SNTP
server updates supported by the CSS.
syssoft Subsystem
SYSSOFT-2: VccAddVc:open conn
failed w/ stat = -1; iVc 320;
eVc 290
This message occurs when a port
transitions from an up to a down state.
Check autonegotiation, for a defective
cable, or for malfunctioning hardware.
SYSSOFT-3: ONDM: Could not open
file <wsscm.sys>
SYSSOFT-3: ONDM: Could not
download Sub-module 8/1.
SYSSOFT-3: ONDM: Could not open
file <wssfm.sys>
SYSSOFT-3: ONDM: Could not
download Sub-module 6/2.
SYSSOFT-3: ONDM: Could not
download Sub-module 6/1.
SYSSOFT-3: ONDM: Could not
download Sub-module 5/2
SYSSOFT-3: ONDM: Could not
download Sub-module 5/1.
SYSSOFT-3: ONDM:No Sfm proxy for
Slot 2.
SYSSOFT-3: ONDM:No Sfm proxy for
Slot 1.
The CSS could not find the image file
to load on the disk. There is something
wrong with the disk or the file was
deleted from the directory.
Contact Cisco Systems TAC.
SYSSOFT-4: SYS:SysImmBind:Bind
Collision TSM:5/1.1 W
This is an informational message. No
further action is required.
Table 4-8 Cisco 11500 Series CSS Log Messages (continued)
Log Message (sys.log: Subsystem
Name, Level, and Message) Cause and Resolution

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English