Cisco 11503 - CSS Content Services Switch User Manual

4-57
Cisco Content Services Switch Administration Guide
OL-5647-02
Chapter 4 Using the CSS Logging Features
Frequently Queried Log Messages
radius Subsystem
RADIUS-7: Auth Primary
RADIUS-7: The id is 63
RADIUS-7: Return Auth Primary
RADIUS-7: RADIUS no memory
available
The RADIUS server does not have the
correct attributes set up for the CSS.
Refer to Cisco Content Services Switch
Security Configuration Guide, for
background information on setting up
an ACS radius server.
RADIUS-4: RADIUS Authentication
failed with reason code 2
In this message, the different codes
include:
#define PW_ACCESS_REQUEST 1
#define PW_ACCESS_ACCEPT 2
#define PW_ACCESS_REJECT 3
#define PW_ACCOUNTING_REQUEST 4
#define PW_ACCOUNTING_RESPONSE 5
#define PW_ACCOUNTING_STATUS 6
#define PW_ACCESS_CHALLENGE 11
In the example above, code 2 indicates
that the CSS received the Accept
response from the RADIUS server but
may have rejected the Accept response,
perhaps due to an invalid username or
password.
This log message only appears when
logging debug messages (debug-7) for
the radius subsystem.
Table 4-8 Cisco 11500 Series CSS Log Messages (continued)
Log Message (sys.log: Subsystem
Name, Level, and Message) Cause and Resolution

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English