Cisco 11503 - CSS Content Services Switch User Manual

Appendix A Upgrading Your CSS Software
Upgrading Your CSS Software
A-8
Cisco Content Services Switch Administration Guide
OL-5647-02
The upgrade script does not overwrite the Cisco-supplied scripts in the script
directory of the new software image with the older versions of the scripts,
except the default-profile script. If the upgrade script detects an older version
of the default-profile script, the script renames the newer default-profile
script as default-profile.new and then copies the older version of the
default-profile script to the script directory of the new software image. For
example:
Saving c:/sg0740002/script/default-profile.new... Done
Copying default-profile to new image... Done
The upgrade script sets the ADI as the primary boot file and reboots the CSS.
setting primary boot-file sg0740002
rebooting
The CSS automatically performs a Flash upgrade, if necessary, and then boots
the new image.
5. After you upgrade and reboot a CSS 11506 that contains a passive SCM, use
the passive sync command in boot-config mode (or the passive sync macro
command) immediately after upgrading your CSS software to synchronize
the boot configurations on the redundant SCMs. Refer to Chapter 2,
Specifying the CSS Boot Configuration, for details on configuring a boot
configuration record for a passive SCM.
6. If the CSS does not have a startup-config file, it uses the file in the archive
directory. To restore the startup-config file on the CSS, use the restore
filename startup-config command. For example, to restore the startup-config
file in the archive directory as the startup-config file on the CSS, enter:
# restore startup-config startup-config

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English