Cisco 11503 - CSS Content Services Switch User Manual

A-7
Cisco Content Services Switch Administration Guide
OL-5647-02
Appendix A Upgrading Your CSS Software
Upgrading Your CSS Software
• If you are using an uncompressed version of the ADI from the FTP
server, include the .adi file extension. For example:
# upgrade “sg0730002.adi”
If you did not configure a default FTP record before starting the upgrade
script, the script prompts you to configure one. At the prompts, enter the FTP
server information where you copied the upgrade ADI
When you configure a default FTP record, you see the following information
during the upgrade:
Current Version:sg0730002
*** You must remove an installed version to upgrade. ***
Attempting to delete sg0720003
archive running-config startup-config
Attempting ftp of sg0740002.adi:
# copy ftp DEFAULT_FTP ${new_version_adi} boot-image
Copying (-) 57,241,012
Completed successfully.
#(config-boot)#
unpack ${new_version_adi}
Unpacking(/) 99%
(config-boot)#
The script copies the scripts and user profiles from the old script directory to
the script directory of the new software image. Note that script_name is the
name of the current script being copied.
Copying scripts from c:/sg0730002/script/ to c:/sg0740002/script/
Working (/)
Copying
script_name ... Done
Note If the copy operation fails, the CSS displays the following messages and
then exits the upgrade process:
Error: Copy of script_name failed!
Script copy failed, upgrade aborted!
If an old script has the same name as a Cisco-supplied script but its contents
differ, the following message appears:
script_name differs between images

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English