Cisco 11503 - CSS Content Services Switch

1-11
Cisco Content Services Switch Administration Guide
OL-5647-02
Chapter 1 Managing the CSS Software
Using the Running-Config and Startup-Config Files
• show running-config interface interface name - Displays a specific interface
component of the running-config file.
– For a CSS 11501, enter the interface name in interface-port format (for
example, e2)
– For a CSS 11503 or CSS 11506, enter the interface name in slot/port
format (for example, 3/1)
• show running-config interfaces - Displays all the interface components of
the running-config file.
• show running-config keepalive {keepalive name} - Displays the existing
keepalive components of the running-config file. For information about a
specific keepalive, enter keepalive_name as a case-sensitive unquoted text
string and a maximum of 32 characters. To see a list of keepalives, enter show
keepalive-summary.
• show running-config nql {name} - Displays network qualifier list (NQL)
information of the running-config file. For information about a specific NQL,
enter the NQL name as a case-sensitive unquoted text string.
• show running-config owner {owner name} - Displays the valid existing
owner components of the running-config file. For information about a
specific owner, enter the owner name as a case-sensitive unquoted text string.
• show running-config rmon-alarm - Displays RMON alarm information of
the running-config file.
• show running-config rmon-event - Displays RMON event information of
the running-config file.
• show running-config rmon-history - Displays RMON history information
of the running-config file.
• show running-config service {service name} - Displays the components of
the running-config file for a valid existing service. For information about a
specific service, enter the service name as a case-sensitive unquoted text
string.
• show running-config ssl-proxy-list {list_name} - Displays RMON history
information of the running-config file. Displays the components of the
running configuration for a valid existing SSL-proxy list. For information
about a specific list, enter list_name as a case-sensitive unquoted text string.