Cisco 11503 - CSS Content Services Switch User Manual

Chapter 1 Managing the CSS Software
Using the Running-Config and Startup-Config Files
1-12
Cisco Content Services Switch Administration Guide
OL-5647-02
• show running-config urql {urql name} - Displays the components of the
running-config file for existing uniform resource locator qualifier lists
(URQL). For information about a specific URQL, enter the URQL name as a
case-sensitive unquoted text string.
The following example shows a running-config file. Comments are preceded by
an exclamation point (!). Note that the CSS does not display default values in the
CSS running configuration or startup configuration even if you manually enter the
values.
# show running-config
!************************ GLOBAL **********************
ip route 0.0.0.0/0 158.3.7.2
!********************** INTERFACE *********************
interface e1
bridge vlan 2
interface e2
bridge vlan 2
!*********************** CIRCUIT **********************
circuit VLAN1
ip address 10.3.6.58 255.255.255.0
circuit VLAN2
ip address 158.3.7.58 255.255.255.0
!*********************** SERVICE **********************
service serv1
ip address 10.3.6.1
active
service serv2
ip address 10.3.6.2
active
!************************ OWNER ***********************
owner arrowpoint.com
content rule1
ip address 158.3.7.43
protocol tcp
port 80
add service Serv1
add service Serv2
active

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English