Contents
vi
Cisco Content Services Switch Administration Guide
OL-5647-02
Configuring a Boot Configuration Record for the Passive SCM 2-10
Configuring the Passive SCM Gateway Address 2-11
Configuring the Passive SCM IP Address 2-11
Configuring the Passive SCM Primary Boot File 2-11
Configuring the Passive SCM Primary Boot Type 2-12
Configuring the Passive SCM Primary Configuration Path 2-13
Configuring the Passive SCM Secondary Boot File 2-13
Configuring the Passive SCM Secondary Boot Type 2-14
Configuring the Passive SCM Secondary Configuration Path 2-15
Configuring the Passive SCM Subnet Mask 2-15
Copying Configuration Information from the Active SCM to the Passive
SCM
2-16
Showing the Boot Configuration 2-17
Booting the CSS from a Network Drive 2-17
Configuring Network Boot for a Primary SCM 2-18
Configuring Network Boot for a Passive SCM 2-19
Showing Network Boot Configurations 2-20
Where to Go Next 2-20
CHAPTER
3 Configuring User Profiles 3-1
User Profiles Overview 3-2
User Profile Configuration Quick Start 3-3
Configuring User Terminal Parameters 3-5
Configuring Terminal Idle 3-5
Configuring Terminal Length 3-6
Configuring the More Terminal Prompt 3-6
Configuring Terminal Netmask-Format 3-7
Configuring Terminal Timeout 3-7
Configuring Idle Timeout 3-8