Cisco 2800 Series User Manual

Easy VPN Configuration Example
Related Information
17
OL-6340-01
*May 24 03:04:52.039: EZVPN(VPN1): Current State: READY
*May 24 03:04:52.039: EZVPN(VPN1): Event: MODE_CONFIG_REPLY
*May 24 03:04:52.039: EZVPN(VPN1): ezvpn_mode_config
*May 24 03:04:52.039: EZVPN(VPN1): ezvpn_parse_mode_config_msg
*May 24 03:04:52.039: EZVPN: Attributes sent in message:
*May 24 03:04:52.039: Address: 10.1.1.4
*May 24 03:04:52.039: DNS Primary: 192.168.168.183
*May 24 03:04:52.039: DNS Secondary: 192.168.226.120
*May 24 03:04:52.039: NBMS/WINS Primary: 192.168.179.89
*May 24 03:04:52.039: NBMS/WINS Secondary: 192.168.2.87
*May 24 03:04:52.039: Split Tunnel List: 1
*May 24 03:04:52.039: Address : 192.168.0.0
*May 24 03:04:52.039: Mask : 255.255.0.0
*May 24 03:04:52.039: Protocol : 0x0
*May 24 03:04:52.039: Source Port: 0
*May 24 03:04:52.039: Dest Port : 0
*May 24 03:04:52.039: EZVPN: Unknown/Unsupported Attr: SPLIT_DNS (0x7003)
*May 24 03:04:52.039: Default Domain: cisco.com
*May 24 03:04:52.039: Savepwd on
*May 24 03:04:52.039: EZVPN: Unknown/Unsupported Attr: BACKUP_SERVER (0x7009)
*May 24 03:04:52.039: EZVPN: Unknown/Unsupported Attr: APPLICATION_VERSION (0x7)
*May 24 03:04:52.039: EZVPN(VPN1): ezvpn_nat_config
*May 24 03:04:52.043: EZVPN(VPN1): New State: SS_OPEN
*May 24 03:04:52.047: EZVPN(VPN1): Current State: SS_OPEN
*May 24 03:04:52.047: EZVPN(VPN1): Event: SOCKET_READY
*May 24 03:04:52.047: EZVPN(VPN1): No state change
!
!--- The following line shows the connection coming up, not part of the debug output.
!
*May 24 03:04:52.075: %CRYPTO-5-SESSION_STATUS: Crypto tunnel is UP . Peer
10.32.152.26:500 Id: 10.32.152.26
!
!---Debug output resumes
!
*May 24 03:04:52.079: EZVPN(VPN1): Current State: SS_OPEN
*May 24 03:04:52.079: EZVPN(VPN1): Event: MTU_CHANGED
*May 24 03:04:52.079: EZVPN(VPN1): No state change
*May 24 03:04:52.079: EZVPN(VPN1): Current State: SS_OPEN
*May 24 03:04:52.079: EZVPN(VPN1): Event: SOCKET_UP
*May 24 03:04:52.079: ezvpn_socket_up
*May 24 03:04:52.079: EZVPN(VPN1): New State: IPSEC_ACTIVE
Related Information
• Cisco IOS Wide-Area Networking Configuration Guide
• Cisco IOS Dial Technologies Configuration Guide
• Cisco IOS Security Configuration Guide
• Cisco IOS Interface and Hardware Component Configuration Guide
• Cisco Technical Assistance Center

Cisco 2800 Series Specifications

General

Power Supply	Internal power supply
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Power Device	Internal power supply
Operating System	Cisco IOS
Integrated Services	Security, voice
WAN Interfaces	T1/E1, Serial
LAN Interfaces	Fast Ethernet, Gigabit Ethernet
Expansion Slots	4
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	IP, TCP
Remote Management Protocol	SNMP, Telnet
Features	VPN support, Quality of Service (QoS), VLAN support
Voltage Required	AC 100-240 V
Security Features	Firewall, VPN, Access Control Lists (ACLs)