Secured Branch Router Configuration Example
Before You Begin
2
OL-6329-01
•
Firewall Websense URL Filtering—The Firewall Websense URL Filtering feature enables your
Cisco IOS firewall (also known as Cisco Secure Integrated Software) to interact with the Websense
URL filtering software, thereby allowing you to prevent users from accessing specified websites on
the basis of some policy. The Cisco IOS firewall works with the Websense server to know whether
a particular URL should be allowed or denied (blocked).
Before You Begin
Conventions
For more information on document conventions, see Conventions Used in Cisco Technical Tips.
Components Used
The information in this document is based on the software and hardware versions below.
•
Cisco 2801 router
•
Cisco IOS Release 12.3(8)T4
•
Advanced IP Services feature set
Note
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make
sure that you understand the potential impact of any command.
Related Products
This configuration can also be used with the following hardware:
•
Cisco 1800 series integrated services router (modular)
•
Cisco 2800 series integrated services router
•
Cisco 3800 series integrated services router
A similar configuration can also be used with a Cisco 3800 series integrated services router that is
equipped with a Cisco Content Engine network module (NM-CE-BP), which has an embedded Websense
URL filtering server (UFS).
To Next Page
Loading...
Need help?
General
