Cisco 2800 Series User Manual

Hoot and Holler over V3PN Configuration Example
Related Information
43
OL-6573-01
Jul 29 16:06:33.935 PDT: ISAKMP:(0:2:SW:1):Node 159862783, Input = IKE_MESG_FROM_PEER,
IKE_QM_EXCH
! PHASE 2 IS SHOWN TO BE COMPLETED SUCCESSFULLY IN THE NEXT LINE.
Jul 29 16:06:33.935 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_QM_I_QM1 New State =
IKE_QM_PHASE2_COMPLETE
Jul 29 16:06:33.935 PDT: IPSEC(key_engine): got a queue event with 2 kei messages
Jul 29 16:06:33.935 PDT: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 10.32.152.26, remote= 10.32.150.46,
local_proxy= 10.32.152.26/0.0.0.0/47/0 (type=1),
remote_proxy= 10.32.150.46/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac (Tunnel),
lifedur= 3600s and 4608000kb,
spi= 0x1442EBFC(339930108), conn_id= 0, keysize= 0, flags= 0x13
Jul 29 16:06:33.935 PDT: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 10.32.152.26, remote= 10.32.150.46,
local_proxy= 10.32.152.26/0.0.0.0/47/0 (type=1),
remote_proxy= 10.32.150.46/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac (Tunnel),
lifedur= 3600s and 4608000kb,
spi= 0x833186D0(2201061072), conn_id= 0, keysize= 0, flags= 0x1B
Jul 29 16:06:33.935 PDT: Crypto mapdb : proxy_match
src addr : 10.32.152.26
dst addr : 10.32.150.46
protocol : 47
src port : 0
dst port : 0
Jul 29 16:06:33.935 PDT: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting with the
same proxies and 101.253.249.204
Jul 29 16:06:33.935 PDT: IPSec: Flow_switching Allocated flow for sibling 80000003
Jul 29 16:06:33.935 PDT: IPSEC(policy_db_add_ident): src 10.32.152.26, dest 10.32.150.46,
dest_port 0
Jul 29 16:06:33.935 PDT: IPSEC(create_sa): sa created,
(sa) sa_dest= 10.32.152.26, sa_proto= 50,
sa_spi= 0x1442EBFC(339930108),
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 4002
Jul 29 16:06:33.935 PDT: IPSEC(create_sa): sa created,
(sa) sa_dest= 10.32.150.46, sa_proto= 50,
sa_spi= 0x833186D0(2201061072),
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 4001
Related Information
• Cisco IOS Quality of Service Configuration Guide, Release 12.3
• Cisco IOS Security Configuration Guide
• Cisco IOS Voice Command Reference, Release 12.3
• Cisco IOS Wide-Area Networking Configuration Guide
• Cisco Technical Assistance Center

Cisco 2800 Series Specifications

General

Power Supply	Internal power supply
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Power Device	Internal power supply
Operating System	Cisco IOS
Integrated Services	Security, voice
WAN Interfaces	T1/E1, Serial
LAN Interfaces	Fast Ethernet, Gigabit Ethernet
Expansion Slots	4
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	IP, TCP
Remote Management Protocol	SNMP, Telnet
Features	VPN support, Quality of Service (QoS), VLAN support
Voltage Required	AC 100-240 V
Security Features	Firewall, VPN, Access Control Lists (ACLs)