IP Communication Solution for Group Applications Configuration Example
Verify
19
OL-6574-01
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
exec-timeout 0 0
password 7 04490E020D205E4107
line vty 5 8
exec-timeout 0 0
password 7 03165E0F040E334340
!
scheduler allocate 20000 1000
ntp clock-period 1079741
ntp master
ntp update-calendar
ntp server 10.68.10.80
ntp server 10.68.10.150
end
Verify
This section provides information you can use to confirm that your configuration is working properly.
Certain show commands are supported by the Output Interpreter Tool (registered customers only),
which allows you to view an analysis of show command output. In summary, use these commands:
•
show telephony-service—Shows the IP telephony services available for Cisco CallManager server
•
show ephone registered—Verifies IP phone registration occurring and lists information associated
with each registered IP phone
•
show commands for the voice gateway
–
show voice port summary—Displays a summary of all voice ports
–
show voip rtp connections—Displays VoIP RTP active connections
–
show voip dsp—Displays DSP information
–
show voice trace—Displays voice-channel configuration information for all DSP channels
–
show voice call summary—Displays the call status for all voice ports
–
show running-config—Displays the contents of the currently running configuration file
•
show commands for CE
–
show version—Displays information about the currently loaded CE software version along
with hardware and device information
–
show running-config—Displays the contents of the currently running configuration file
–
show processes cpu—Displays detailed CPU utilization statistics (CPU use per process)
–
show statistics wmt streamstat—Displays statistics for Windows Media Technologies (WMT)
streaming connections
–
show statistics wmt all—Display all WMT statistics
•
show and service commands on Cisco CME for Cisco Unity Express
–
show interface service-engine—Displays the status of the service-engine interface
–
service-module service-engine 4/0 status—Displays status of Cisco Unity Express
To Next Page
Loading...
Need help?
General
