IP Communication Solution for Group Applications Configuration Example
Verify
20
OL-6574-01
–
service-module service-engine 4/0 session—Opens session with Cisco Unity Express
•
show commands for Cisco Unity Express
–
show running-config—Displays the contents of the currently running configuration file
–
show voicemail mailboxes—Displays summary of mailbox owners and status
–
show voicemail usage—Displays snapshot of voicemail system use
–
show voicemail limits—Displays system limits for voicemail system
–
show ccn application—Displays details about each configured application
–
show ccn trigger—Displays the parameter values for all configured triggers
Representative output for each of these commands is presented in the verification summaries that follow.
Note
Relevant display output is highlighted as appropriate.
The following is an example of output for the show telephony-service command on the Cisco CME:
CCME-CUE-SJC# show telephony-service
CONFIG (Version=3.2)
=====================
Version 3.2
Cisco CallManager Express
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm
ip source-address 10.1.152.9 port 2000
load 7910 P00403020214
load 7960-7940 P00303020214
max-ephones 27
max-dn 40
max-conferences 8
dspfarm units 0
dspfarm transcode sessions 0
max-redirect 5
dialplan-pattern 1 408902.... extension-length 5
voicemail 27749
mwi relay
mwi expires 99999
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
secondary-dialtone 9
url services http://phone-xml.berbee.com/menu.xml
call-forward pattern .....
transfer-pattern .....
keepalive 30
timeout interdigit 5
timeout busy 10
timeout ringing 180
caller-id name-only: enable
system message CCME2 Cisco (MCEBU) Bldg 22
web admin system name cisco password 3800
web admin customer name cisco1 password 38001
edit DN through Web: enabled.
edit TIME through web: enabled.
Log (table parameters):
max-size: 150
To Next Page
Loading...
Need help?
General
