EasyManuals Logo

Cisco 2800 Series User Manual

Cisco 2800 Series
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
Hoot and Holler over V3PN Configuration Example
Troubleshoot
41
OL-6573-01
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1): vendor ID is DPD
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1): processing vendor id payload
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1): speaking to another IOS box!
Jul 29 16:06:33.635 PDT: ISAKMP:received payload type 20
Jul 29 16:06:33.635 PDT: ISAKMP:received payload type 20
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL,
IKE_PROCESS_MAIN_MODE
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM4 New State = IKE_I_MM4
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Send initial contact
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):SA is doing pre-shared key authentication using
id type ID_IPV4_ADDR
Jul 29 16:06:33.639 PDT: ISAKMP (0:134217730): ID payload
next-payload : 8
type : 1
address : 10.32.152.26
protocol : 17
port : 500
length : 12
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Total payload length: 12
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1): sending packet to 10.32.150.46 my_port 500
peer_port 500 (I) MM_KEY_EXCH
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM4 New State = IKE_I_MM5
Jul 29 16:06:33.643 PDT: ISAKMP (0:134217730): received packet from 10.32.150.46 dport 500
sport 500 Global (I) MM_KEY_EXCH
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing ID payload. message ID = 0
Jul 29 16:06:33.643 PDT: ISAKMP (0:134217730): ID payload
next-payload : 8
type : 1
address : 10.32.150.46
protocol : 17
port : 500
length : 12
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing HASH payload. message ID = 0
! REMOTE PEER IS SHOWN TO BE AUTHENTICATED IN THE NEXT LINE.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):SA authentication status:
authenticated
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):SA has been authenticated with 10.32.150.46
Jul 29 16:06:33.643 PDT: ISAKMP: Trying to insert a peer 10.32.152.26/10.32.150.46/500/,
and inserted successfully.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM5 New State = IKE_I_MM6
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL,
IKE_PROCESS_MAIN_MODE
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM6 New State = IKE_I_MM6
Jul 29 16:06:33.643 PDT: ISAKMP (0:134217730): received packet from 10.32.150.46 dport 500
sport 500 Global (I) MM_KEY_EXCH
Jul 29 16:06:33.643 PDT: ISAKMP: set new node 2118711810 to QM_IDLE
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing HASH payload. message ID =
2118711810
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing DELETE payload. message ID =
2118711810
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):peer does not do paranoid keepalives.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):deleting node 2118711810 error FALSE reason
"Informational (in) state 1"
Jul 29 16:06:33.643 PDT: IPSEC(key_engine): got a queue event with 1 kei messages
Jul 29 16:06:33.643 PDT: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
! PHASE 1 IS SHOWN TO BE COMPLETED SUCCESSFULLY IN THE NEXT LINE.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM6 New State =
IKE_P1_COMPLETE
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):beginning Quick Mode exchange, M-ID of
159862783

Table of Contents

Other manuals for Cisco 2800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 2800 Series and is the answer not in the manual?

Cisco 2800 Series Specifications

General IconGeneral
Power SupplyInternal power supply
Product TypeRouter
Form FactorRack-mountable
Connectivity TechnologyWired
Power DeviceInternal power supply
Operating SystemCisco IOS
Integrated ServicesSecurity, voice
WAN InterfacesT1/E1, Serial
LAN InterfacesFast Ethernet, Gigabit Ethernet
Expansion Slots4
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Network/Transport ProtocolIP, TCP
Remote Management ProtocolSNMP, Telnet
FeaturesVPN support, Quality of Service (QoS), VLAN support
Voltage RequiredAC 100-240 V
Security FeaturesFirewall, VPN, Access Control Lists (ACLs)

Related product manuals