31
Using the ROM Monitor
OL-5997-02
Additional References
Additional References
The following sections provide references related to using the ROM monitor.
Related Documents
Related Topic Document Title
Connecting your PC to the router console port
•
Quick start guide for your router
•
Hardware installation guide for your router
Break key sequence combinations for entering ROM
monitor mode within the first 60 seconds of rebooting
the router
Standard Break Key Sequence Combinations During Password
Recovery
Upgrading the ROM monitor ROM Monitor Download Procedures for Cisco 2691, Cisco, 3631,
Cisco 3725, and Cisco 3745 Routers
Note
These procedures also apply to Cisco 1841 series,
Cisco
2800 series, and Cisco 3800 series routers.
Using the boot image (Rx-boot) to recover or upgrade
the system image
How to Upgrade from ROMmon Using the Boot Image
Booting and configuration register commands Cisco IOS Configuration Fundamentals Command Reference
Loading and maintaining system images; rebooting Cisco IOS Configuration Fundamentals and Network Management
Configuration Guide
Choosing and downloading system images Software Center at
http://www.cisco.com/kobayashi/sw-center/index.shtml
Console download (xmodem) Xmodem Console Download Procedure Using ROMmon
Router crashes Troubleshooting Router Crashes
Understanding Software-forced Crashes
Router hangs Troubleshooting Router Hangs