EasyManua.ls Logo

Cisco 2800 Series - Page 85

Cisco 2800 Series
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IP Communication Solution for Group Applications Configuration Example
Configure
9
OL-6574-01
switchport voice vlan 110
no ip address
!
interface FastEthernet3/2
switchport access vlan 100
switchport trunk native vlan 100
switchport mode trunk
switchport voice vlan 110
no ip address
!
interface FastEthernet3/3
switchport access vlan 100
switchport trunk native vlan 100
switchport mode trunk
switchport voice vlan 110
no ip address
!
!
!---Cisco Unity Express used for local voice-mail storage
!
interface Service-Engine4/0
ip unnumbered Loopback2
service-module ip address 10.1.152.242 255.255.255.252
service-module ip default-gateway 10.1.152.241
!
!--- Data VLAN, used for the desktops at the branch
!
interface Vlan100
ip address 192.168.10.1 255.255.255.0
ip pim sparse-dense-mode
ip nat inside
ip virtual-reassembly
!
interface Vlan110
ip address 10.1.153.1 255.255.255.248
ip pim sparse-dense-mode
ip virtual-reassembly
!
!---OSPF used as the routing protocol for scenario
!
router ospf 1
router-id 10.1.152.9
log-adjacency-changes
network 10.1.152.9 0.0.0.0 area 0
network 10.1.152.10 0.0.0.0 area 0
network 10.1.152.28 0.0.0.3 area 0
network 10.1.152.140 0.0.0.3 area 0
network 10.1.152.240 0.0.0.3 area 0
network 10.1.152.248 0.0.0.3 area 0
network 10.1.153.0 0.0.0.3 area 0
!
!---Static routes defined for routing to Service-Engine and Content-Engine network Module
ip classless
ip route 10.1.152.242 255.255.255.255 Service-Engine4/0
ip route 10.1.152.250 255.255.255.255 Content-Engine1/0
!
ip http server
ip http authentication aaa login-authentication LOCAL
no ip http secure-server
ip http path flash:
!
!---PAT (Port address translation used for the Data VLAN.
ip nat inside source list 11 interface Serial0/0/0 overload

Table of Contents

Other manuals for Cisco 2800 Series

Related product manuals