Index
IN-2
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
802.3X flow control, enabling 4-31
A
AAA override
configuring
using the CLI
5-80
using the GUI 5-79 to 5-80
described 5-78
AC adapter warning for Japan B-7
Access Control List Name parameter 5-56
access control lists (ACLs)
applying to an interface
using the CLI
5-65
using the GUI 5-59 to 5-60
applying to a WLAN
using the CLI
5-65
using the GUI 5-61 to 5-62
applying to the controller CPU
using the CLI
5-65
using the GUI 5-60 to 5-61
configuring
using the CLI
5-63 to 5-64
using the GUI 5-55 to 5-58
configuring for the debug facility D-35 to D-36
counters
configuring using the CLI
5-63
configuring using the GUI 5-55
described 5-54
identity networking 5-75
rules 5-54, 5-56, 5-64
using with the debug facility D-34 to D-35
Access Control Lists > Edit page 5-58
Access Control Lists > New page 5-55
Access Control Lists > Rules > New page 5-56
Access Control Lists page 5-55
Access Mode parameter 4-26, 4-28
access point core dumps, uploading
using the CLI
7-32
using the GUI 7-31
access point event logs, viewing D-13
access point groups
assigning access points to
using the CLI
6-48
using the GUI 6-46 to 6-47
creating
using the CLI
6-47 to 6-48
using the GUI 6-44 to 6-47
default group 6-44
described 6-42
illustrated 6-43
number supported 6-44
removing
using the CLI
6-47
using the GUI 6-45
viewing 6-48 to 6-49
access point manager interface, configuring using the
configuration wizard
4-5
access point monitor service, debugging D-43
access points
20-MHz channelization
11-27
40-MHz channelization 11-27
adding MAC address to controller filter list
using the GUI
8-12 to 8-13
assisted roaming 4-41
authorization list 7-23
authorizing
using LSCs
7-19 to 7-22
using MICs 7-18
using SSCs 7-18
using the CLI 7-23
using the GUI 7-22
configuring hybrid REAP using the CLI 13-14
converting to mesh access points 8-48
embedded 7-14
guidelines for operating in Japan B-6, B-7
LEDs
configuring
7-74
To Next Page
Loading...
Need help?
General
