Cisco 4400 Series User Manual

Index
IN-8
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
using the CLI 6-52
using the GUI 6-51 to 6-52
described 6-49
Conditional Web Redirect parameter 6-52
Configuration File Encryption parameter 9-24
configuration files
downloading
using the CLI
9-25 to 9-26
using the GUI 9-23 to 9-24
editing 9-27 to 9-28
uploading
using the CLI
9-22 to 9-23
using the GUI 9-21 to 9-22
configuration wizard
described
4-2
running 4-4 to 4-6
Configure option for RRM override 11-26
Confirm Password parameter 13-10
Console Log Level parameter D-8
Control and Provisioning of Wireless Access Points
protocol (CAPWAP)
1-6
debugging 7-5
described 7-2
guidelines 7-2
viewing MTU information 7-5
controller failure detection time, reducing 7-41
controller network module
baud rate
3-3
versions 3-4
controllers
configuration
clearing
9-28
erasing 9-28
saving 9-26
connections 1-12
discovery process 7-2
guidelines for operating in Japan B-6 to B-7
multiple-controller deployment 1-4
overview 1-6 to 1-7
platforms 1-7 to 1-12
resetting factory default settings
using the CLI
4-3
using the GUI 4-3
single-controller deployment 1-3 to 1-4
synchronizing with location appliance 4-86
types of memory 1-15
upgrading software
guidelines
9-2 to 9-3
using the CLI 9-10 to 9-12
using the GUI 9-8 to 9-10
uploading core dump files from D-17
Controller Spanning Tree Configuration page 3-26
Controller Time Source Valid parameter 5-70
Control Path parameter 12-23
conventions of document xxv to xxvii
core dump files, uploading from the controller D-17
Country Code parameter 7-51
country codes
commonly used
7-49
configuring
using the CLI
7-52 to 7-54
using the configuration wizard 4-5
using the GUI 7-50 to 7-51
described 7-49
Japanese 7-55
viewing using the CLI 7-53
Country page 7-50
Coverage Exception Level per AP parameter 11-16
coverage hole detection
configuring per controller
using the CLI
11-21
using the GUI 11-15 to 11-17
disabling on a WLAN
described
6-54
using the CLI 6-55
using the GUI 6-54 to 6-55
coverage hole detection and correction 11-4
Coverage Hole Detection Enabled parameter 6-54

Cisco 4400 Series Specifications

General

Product Type	Wireless LAN Controller
Manageable	Yes
Management Port	Yes
Power over Ethernet (PoE)	No
Operating Temperature	32 to 104°F (0 to 40°C)
Security	WPA, WPA2, 802.1X, AES, TKIP
Power Supply	AC Power Supply
Wireless LAN Standard	IEEE 802.11a/b/g/n
Form Factor	Rack-mountable
Redundancy	Yes
Operating Humidity	10% to 90% non-condensing